Specification for Dental High and Low Speed Handpiece Kit:
High Speed Handpiece
Description:
Standard Push button type, high speed handpiece, Single-way water spray
Needle Change Type
Push button
Air Pressure
180~250 KPa (1.8~2.5 kgf/cm2)
Water Pressure
198Kpa (2 kg)
Rotation Speed
370,000-420,000 rpm
Head Hight
13.14 mm
Head Diameter
φ11.2 mm
Bur Applicable
φ1.59mm~φ1.6mm×21mm~23mm (diameter×length)
Noise
≤70dB
Low Speed Kit Features: - E-type connector - Wrench type - Precise technology, Steady, no vibration while revolving, offering a steady operation. - Suitable for any E-type handpiece accords with ISO standard - 135°C Autoclavable, suitable for both steam and chemical autoclav
Contra Angle Handpiece - Low Speed 22,000-27,000 rpm. - The shank of the instrument mounted therein is 2.35 mm - Fastening of the instruments with a turning latch - Autoclavable 135°C - For any lab or E-type motors
Straight Nosecone - Working pressure: 0.3MPa ; - 0.25MPa (Measure meter is installed at the end of air motor to measure the air pressure). - Revolution: about 22000-27000r/min (adjustable between clockwise or anticlockwise) - Noise: ≤68dB - Air consumption: about 56L/min - Ratio: 1:1
Air Mortor EX-203 - Supply air pressure: 245-392KPa (2.5-4kgf/CM2) - 1:1 Direct Drive - Borden 2 holes/ Midwest 4 hole - Max speed 20,000 min-1
Packing List for Dental Hanpiece Kit : - E-type air motor 2-Hole/4-hole: 1 each - Straight nose cone: 1 each - Contra Angle handpiece: 1 each - Water spray nozzle: 1 each - Oil spray nozzle: 1 each - CAP Spanner: 1 each - English manual: 1 each
